Handcrafted on Long Island, NY
Built for
the Water.
“Stop searching. Start fishing.”
Got a design in mind? We partner with you to build custom, one-off gear made to fit your boat and whatever makes your time on the water better. See custom builds →
Keep everything within arm's reach when it counts. The TackleMate is a custom 3D-printed cockpit organizer built for anglers, holding your knives, lures, plugs, pliers, and more right on your console. Built-in drainage holes let water flow straight through, so nothing sits and collects.
It comes with 5 heavy-duty suction cups and locking stainless steel nuts for a rock-solid hold on any smooth surface. Prefer a permanent install? Flush-mount spacers are included so you can screw it in clean. Screws are not included, so you can pick whatever works best for your setup.
Printed with UV-resistant, marine-grade material that is built to handle sun, salt, and whatever else the water throws at it.
Not sure it will fit your console, or need a different size? Message me before ordering, and I'll build one to fit your needs.
Keep your binoculars secure and within reach when the water gets rough. This holder mounts to any smooth surface with heavy-duty suction cups and stainless steel hardware, so it stays put through the chop. Drainage holes in the bottom keep water from pooling.
Made to fit fishing boats, sailboats, cruisers, kayaks, and just about anything on the water.
Printed with UV-resistant, marine-grade material that is built to handle sun, salt, and whatever else the water throws at it.
Not sure yours will fit, or need a different size? Message me before ordering, and I'll build one to fit your pair.
Keeps your sinkers separated, organized, and exactly where you need them, so you always know what you are grabbing. Choose a 2-slot or 3-slot box and emboss each slot with the ounce weight label of your choice.
Built-in drainage holes keep water from sitting in the box. Drill and mount it wherever works best for your setup. Hardware is not included, so you can pick whatever suits your boat.
Built with UV-resistant, marine-grade material that will not fade, crack, or break down in tough conditions.
Not sure it will fit your space, or need a different size? Message me before ordering, and I'll build one to fit your needs.
Wall-mounted knife racks made for boats, fish cleaning stations, butcher shops, deer processing setups, or wherever you need your knives organized and off the counter.
Small: 2 knives plus 2 slots for your pliers, scissors, or line cutters.
Large: 8 knives plus a slot for your pliers, scissors, or line cutters.
The Large Knife Holder has four slots that fit slim blades (up to 0.09" wide) and four slots that fit wider blades (up to 0.14" wide). The Small Knife Holder has two slots that fit blades up to 0.11" wide. It handles fillet knives, bait knives, butcher knives, whatever you have. The extra slots on the end fit a pair of pliers, scissors, or line cutters.
Custom text on the back wall is included at no extra cost. Boat name, shop name, last name, whatever you want on it. Just enter it in the customization field below before adding to cart.
Two mounting holes on the back let you screw it right into a cabin wall, cleaning table, dock post, or shop wall.
Marine-grade and UV-resistant. Built to last season after season.
Makes a great gift for the fisherman, hunter, or butcher in your life, especially personalized with their name or boat name on it.
Need a different size or a custom layout? Message me before ordering, and I'll build one to fit your needs.
Heavy-duty, marine-grade cup and drink holder with suction cups for boats, RVs, golf carts, and more.
Fits Yeti, Owala, and Stanley tumblers, bottles, and cans. Won't rust, rot, or fade in the salt and sun.
Mounts to any flat, smooth surface: boat, golf cart, sailboat, RV, cooler, and more.
Small holds slim stuff like soda cans, beer bottles, and standard water bottles. Medium fits most insulated tumblers and mugs, think a 20oz Yeti tumbler, 30oz Stanley, Stanley-style mugs, or a 12oz can koozie. Large is built for the bigger bottles: 40oz Owala, 26 to 36oz Yeti bottles, and similar oversized insulated bottles.
Small: 6.2"L x 2.7"W x 3.1"H · Medium: 7.8"L x 3.4"W x 3.5"H · Large: 8.8"L x 3.9"W x 4"H
This Fishing Gaff, Boat Brush, Docking Pole, and Boat Hook Holder keeps your marine tools secure and accessible.
Heavy-duty, marine-grade build. Won't rust, rot, or fade in the salt and sun.
Sold as a set of 2 mounts (fits one pole, gaff, or brush per set).
Easily mounts to a boat gunwale/gunnel.
Screws are not included.
Heads up: All Sea Ryder Co. products are designed to hold sharp objects. Always make sure your product is securely mounted before use.
Brought to Life?
Here is a look at some of the custom builds we have made and the gear our customers are running on their own boats. If you have something in mind, whether it is a holder, an organizer, or anything else that would make your time on the water better, reach out and we will talk through the details and pricing.
Real Anglers,
Real Reviews.
“Just got my TackleMate! Very happy with it and it was delivered next day! Material seems very durable. Can’t wait to see what other products get released.”
“Great products! A1 seller.”
“Great experience! I contacted Eric (Sea Ryder) with a request for a custom fit sinker box. Eric quickly replied and sent back CAD plans showing the measurements for approval, and very soon after the piece was ready. The 3D printed material is UV resistant and has no deformation of the walls when filled with sinkers. I’d highly recommend Sea Ryder for any custom storage or organization needs. Quality product, great service and very fair pricing.”
“Just got this in and love it already. Exactly what I was looking for to clean up my dash. No more jigs and leaders floating around. Shipping was super fast, showed up quick.”
“I ordered a TackleMate for my partner for Father’s Day and he absolutely loves it. Great quality, came exactly as I had personalized, and shipping was super fast. Highly recommend.”
“The sinker boxes were custom made to the space I had in my cabin. They fit perfectly and hold more sinkers than I could lose in a season, and I don’t go blackfishing. The tackle organizer is deep enough to fit the day’s extra rigs but shallow enough to stay out of the way of running the boat. From phone call to finished product was less than 3 days. I highly recommend these products, and the professionalism of Eric makes the transaction a breeze.”
“Amazing product. Fast delivery. Highly recommended. Excellent quality and design of custom tool and tackle holder.”
“Picked up some custom knife holders for butchering and tested these out for the first time yesterday while cutting up my turkey. Got two for the garage and one for the house. These things are mint. Definitely highly recommend Eric, who custom makes these and many more practical and durable items.”
“Very happy with my TackleMate! Really quick turnaround from time of order to delivery and exceptional quality. Thank you Eric and Dave for a great product!”
“Ordered a custom knife holder for my grandpa’s butcher shop, and it came out great! Holds everything well and fits right where I needed it! Eric is a good guy to deal with!”
“This is a great company. Super customizable options and a great price. Highly recommend it!”
“Absolutely love my TackleMate. I have a smaller 17′ boat with little storage and not a lot of room, and always struggled with having quick easy access to lures, leader and pliers without having to dig through my tackle bag. Awesome product, awesome customer service from an awesome owner who cares.”
“Eric made a beautiful piece for the Debra Ann to hold our sinkers! It was a 3 day turnaround from start to finish. Looks great on the boat!!”
“Just got my TackleMate! Very happy with it and it was delivered next day! Material seems very durable. Can’t wait to see what other products get released.”
“Great products! A1 seller.”
“Great experience! I contacted Eric (Sea Ryder) with a request for a custom fit sinker box. Eric quickly replied and sent back CAD plans showing the measurements for approval, and very soon after the piece was ready. The 3D printed material is UV resistant and has no deformation of the walls when filled with sinkers. I’d highly recommend Sea Ryder for any custom storage or organization needs. Quality product, great service and very fair pricing.”
“Just got this in and love it already. Exactly what I was looking for to clean up my dash. No more jigs and leaders floating around. Shipping was super fast, showed up quick.”
“I ordered a TackleMate for my partner for Father’s Day and he absolutely loves it. Great quality, came exactly as I had personalized, and shipping was super fast. Highly recommend.”
“The sinker boxes were custom made to the space I had in my cabin. They fit perfectly and hold more sinkers than I could lose in a season, and I don’t go blackfishing. The tackle organizer is deep enough to fit the day’s extra rigs but shallow enough to stay out of the way of running the boat. From phone call to finished product was less than 3 days. I highly recommend these products, and the professionalism of Eric makes the transaction a breeze.”
“Amazing product. Fast delivery. Highly recommended. Excellent quality and design of custom tool and tackle holder.”
“Picked up some custom knife holders for butchering and tested these out for the first time yesterday while cutting up my turkey. Got two for the garage and one for the house. These things are mint. Definitely highly recommend Eric, who custom makes these and many more practical and durable items.”
“Very happy with my TackleMate! Really quick turnaround from time of order to delivery and exceptional quality. Thank you Eric and Dave for a great product!”
“Ordered a custom knife holder for my grandpa’s butcher shop, and it came out great! Holds everything well and fits right where I needed it! Eric is a good guy to deal with!”
“This is a great company. Super customizable options and a great price. Highly recommend it!”
“Absolutely love my TackleMate. I have a smaller 17′ boat with little storage and not a lot of room, and always struggled with having quick easy access to lures, leader and pliers without having to dig through my tackle bag. Awesome product, awesome customer service from an awesome owner who cares.”
“Eric made a beautiful piece for the Debra Ann to hold our sinkers! It was a 3 day turnaround from start to finish. Looks great on the boat!!”
Born on the
Water
“Every product started as a problem I had on my own boat.”
I was born and raised on Long Island, and fishing has been a way of life for over 25 years, on the water with close friends, chasing fish through every season. I have seen a lot, learned a lot, and along the way I kept thinking that I wished there was something better out there. Something built the right way, for the way I actually fish.
Too much digging, not enough organization, and nothing on the market built for the way I actually fish. So I stopped waiting and built it myself.
Sea Ryder Co. is named after my boat Sea Ryder and my dog Ryder, both pictured below. Every product is designed on the water, handcrafted on Long Island, and made to order. This company is as personal as it gets.
Questions &
Comments
Have a question about a product, want to know more, or just want to say hello? We are always happy to hear from you.
All Sea Ryder Co. products are made to order, and orders with personalized text are final sale. That said, your satisfaction means everything to us. If anything is not right, whether your product arrives damaged, does not meet your expectations, or you just have a concern, reach out within 7 days and we will work with you to make it right. We stand behind every product we make.